Legacy Manufactured-Home Brand

Coleman Evcon HVAC Systems in Phoenix Manufactured Homes

The Evcon nameplate means manufactured-home equipment, and usually equipment with some years on it. Here is what that changes about the service call, the parts and the decision to keep it running.

  • DG, EB and EBE furnace families
  • Older equipment, honest assessment
  • Heat exchanger decides the repair
  • Independent of Johnson Controls

Schedule today — we’re here 24/7.

Veteran Owned & Operated
Older manufactured home in Apache Junction with a packaged HVAC unit at the end of the home under a metal awning
Same-day serviceAcross the Phoenix metro

Independent service. Bleuwave HVAC is not affiliated with, endorsed by, or an authorized dealer of Coleman (Johnson Controls). Coleman (Johnson Controls) and related product names are trademarks of their owners. We service and replace this equipment as an independent contractor.

About the Coleman Evcon brand

Coleman Evcon is a name from the era when manufactured-housing HVAC had its own catalogs, its own dealers and its own nameplates, and it has outlived that era on furnace doors all over Arizona. The Evcon label belongs to the Coleman line, which sits under Johnson Controls today. The word Evcon usually signals two things at once: equipment built for a manufactured home, and equipment of a certain age. Our seed records list the DG, EB and EBE families along with manufactured-home package families, covering electric and gas furnaces, coils and package equipment. We do not print anything past that. Bleuwave HVAC is an independent Phoenix service company. We are not affiliated with, endorsed by or an authorized dealer of Coleman, Coleman Evcon or Johnson Controls, and those trademarks belong to their owners. For the current residential lineup, the Coleman brand page is the better read; this page is about the manufactured-home equipment that is still running.

Product families found in Phoenix homes

Walk a manufactured-home community in Apache Junction, Mesa or the far west Valley and the Evcon nameplate shows up in three forms.
  • Closet furnaces. The DG, EB and EBE families are downflow furnaces built to the dimensions and listings that manufactured housing requires. Gas or electric, they stand in a hallway closet and blow into the floor plenum.
  • Matched coils. A cased coil above the furnace, piped to an outdoor condenser on a pad, turns the closet furnace into the indoor half of a cooling system. This is what the furnace does from April to October.
  • Package equipment. A single outdoor cabinet holding heating and cooling together, ducted through the floor. Common on lots where there was never a closet unit or where one was removed.
The homes these serve carry some of the highest cooling loads per square foot in the Valley: thin walls, low roof cavities that hit attic-like temperatures by noon, west-facing glass with no overhang and a belly duct suspended over hot ground. Our manufactured home HVAC page covers what that means for sizing and duct design.

Common problems and repair considerations

Age is the theme. An Evcon-labeled furnace has generally been in service long enough that its problems are the problems of any older furnace, plus the manufactured-home specifics.

On gas furnaces

Ignition components, flame sensors and pressure switches accumulate a summer of dust before every heating season. Heat exchanger condition matters more with every year, and it is the one item that ends the repair conversation if it fails inspection. Roof venting on a manufactured home is exposed to wind and monsoon rain and needs to be checked, not assumed.

On electric furnaces

Elements and sequencers wear with cycling. A furnace that trips its breaker on a cold morning, or heats for a few minutes and quits, is usually telling you about one of them. Reset the breaker once. If it trips again, leave it off and call.

On the cooling side

Coils freeze when the belly duct leaks or the return is starved. Condensate drains clog and flood the closet floor. Outdoor units on the sunny side of the home lose capacitors and contactors in July. Homeowner checks stop at the filter, the thermostat, one breaker reset, visible ice, debris around the outdoor unit and the off switch. Panels stay closed.

Repair vs replacement for this brand

We will be direct. Older Evcon equipment is very often repairable, and the parts that fail most, capacitors, contactors, sequencers, ignition components and drain fittings, are modest relative to a new system. If the heat exchanger is sound, the cabinet is not rusted through and the coil holds its charge, a repair is the right call and we will make it. Replacement earns its place when the heat exchanger fails, when the compressor on a matched outdoor unit dies, when the system runs a refrigerant that has become uneconomical to buy, or when the home has changed enough that the original sizing no longer fits. For package equipment, the gas pack replacement page explains what a like-for-like swap involves. The repair-vs-replace guide gives the general arithmetic, and it is honest about the fact that a page cannot size a system or diagnose a fault. A technician in the closet can.

Parts, warranty and service notes

Parts for Evcon-labeled equipment come through the Johnson Controls residential channel where a current part exists, and through current-equivalent components where it does not. Some items on the oldest units are simply no longer produced, and we tell you that before you commit to a repair rather than after. Manufacturer warranty terms follow the documents for your specific unit and its registration; given the age of most Evcon equipment, the practical answer is usually in your file cabinet, and Bleuwave does not verify or administer manufacturer coverage. What we bring: a flat rate quoted before the work, 24/7 same-day service, NATE-certified technicians, and for replacement a written estimate with financing on approved credit. Annual heating maintenance before the first cold morning is the single best investment in an older gas closet furnace. Licensed, bonded and insured, ROC #340022, serving the Valley since 2022.
Equipment record

Coleman (Johnson Controls) at a glance

Current label
Coleman (Johnson Controls)
Former labels
Coleman Evcon
Parent relationship
Johnson Controls
Verified series / prefixes
DG; EB; EBE
Equipment types
Manufactured-home electric and gas furnaces, cased coils and package equipment
Configurations
research pending
Refrigerant or energy source
Electricity and natural gas or propane for heating; refrigerant generation varies by unit age, research pending
Era and status
research pending (Evcon-badged units in Valley homes are typically older installations)
Phoenix application
Hallway furnace closets, matched coils and end-of-home package units in older manufactured-home communities in Apache Junction, Mesa and the west Valley
Common search intent
repair, no heat, no cooling, parts, replacement, cost, estimate, package unit

Product families in the record

  • Manufactured-home furnace and HVACDG; EB; EBE; manufactured-home package familiesElectric and gas furnaces, coils and package equipment for manufactured homes.
Service note: Independent service; not affiliated with Coleman, Coleman Evcon or Johnson Controls. Parts availability for the oldest units is confirmed before a repair is quoted, and heat exchanger condition governs whether a gas furnace repair proceeds.
Series and prefixes are listed only where the equipment record supports them. Anything marked research pending has not been verified and should be confirmed from the unit nameplate on site.
FAQ

Coleman Evcon HVAC Systems in Phoenix Manufactured Homes: common questions

Straight answers, no runaround. Don’t see yours? Our team is a phone call away, around the clock.

Still have questions?

(480) 863-5855

Open 24/7 · Same-day service

The Evcon-badged manufactured-home equipment in Valley homes is largely older stock; current Coleman residential equipment is sold under the Coleman name by Johnson Controls. Whether a specific Evcon family remains in production is research pending, and we will not guess.

That it is manufactured-home equipment from the Coleman line and that it has probably been in service for a while. That shapes the visit: we look harder at heat exchanger condition, cabinet corrosion and drain condition than we would on a newer unit.

A brief burnt-dust smell on first start is common after a Phoenix summer. A persistent smell, a gas odor or a furnace that starts and stops is not. Shut it off and call; for a gas odor, leave the home and call the gas utility first.

Frequently, yes, if the furnace is sound and the new coil matches the outdoor unit. On the oldest Evcon furnaces, the fit and the remaining life of the furnace decide whether that is money well spent. We assess both on site.

No. We are an independent Phoenix contractor with no affiliation to Coleman, Coleman Evcon or Johnson Controls, and their trademarks belong to their owners. We service the equipment because it is in the homes we serve.

Long run times in July are partly normal in a manufactured home; a unit that never catches up is not. Dirty coils, low charge, leaking floor ducts or a unit sized for a home that has since gained a sunroom are the usual reasons. The running but the house is hot page walks through them in order.

Heat exchanger condition, compressor health, refrigerant type and how much the home has changed. If all four are favorable, repair. If two or more are not, price the replacement; the repair-vs-replace guide goes deeper, and the on-site evaluation settles it.

Local service

Coleman (Johnson Controls) service throughout the Phoenix area

Same-day appointments across Maricopa and Pinal counties. Pick your city for local pricing pages, reviews and service details.

Have the old Evcon system evaluated before the first cold morning

A technician inspects the heat exchanger, tests the cooling side and gives you a straight answer on repair or replacement. Call (480) 863-5855 or book online.

Call (480) 863-5855
  • 24/7 emergency service
  • Upfront, honest pricing
  • Licensed, bonded & insured

Request service

We'll get right back to you.

Helps us block automated spam.

No spam. We reply fast — usually within the hour during business hours.

Call Now